SCI & SCIE papers
저자명 | 논문명 | 게재지명 | ISSN | I.F | 권 | 호 | 수록면 | 게재 년월 |
인용 |
---|---|---|---|---|---|---|---|---|---|
Yeong-Do Park, Namhyun Kang, Steve H. Malene, and David L. Olson | Effect of Exothermic Additions on Heat Generation and Arc Process Efficiency in Flux-Cored Arc Welding | METALS AND MATERIALS International |
|
|
13 | 6 | 501-509 | 2007-12 | 1 |
Inae Park, Namhyun Kang, Suyoung Kim, Youngjung Lee, and Kyung mox Cho | Microstructure and Mechanical Properties of Control Rolled Fe-0.1C-(V, Nb) Steels | Journal of the Korean Institute of Metals and Materials |
|
|
45 | 5 | 321-328 | 2007-05 | 1 |
Sudeep Abraham, Eun Young Choi, Namhyun Kang, Kwang Ho Kim | Microstructure and mechanical properties of Ti-Si-C-N films synthesized by plasma-enhanced chemical vapor deposition | Surface & Coatings Technology |
|
|
202 | 915-919 | 2007-05 |
|
|
Youngwoo Kim, Namhyun Kang, Youngdo Park, Ildong Choi, Gyosung Kim, Sungkyu Kim, and Kyungmox Cho | Effects of the Strain Induced Martensite Transformation on the Delayed Fracture for Al-added TWIP Steel | Journal of the Korean Institute of Metals and Materials |
|
|
46 | 12 | 780-787 | 2008-12 | 12 |
Sang-Soon Park, Sang-Min Lee, Yongjoon Cho, Nam-Hyun Kang, Ji-Hun Yu Young-Seok Kim, and Yeong-Do Park | Evaluation of Resistance Spot Weld Interfacial Fractures in Tensile-Shear Tests of TRIP 590 Steels | Journal of the Korean Institute of Metals and Materials |
|
|
46 | 10 | 672-682 | 2008-12 | 6 |
Kwang Ryul Kim, Namhyun Kang, Sung Hak Cho, and Kwang Ho Kim | Plume Formation During Laser Heating of a Solid Surface | Journal of Computational and Theoretical Nanoscience |
|
|
5 | 8 | 1592-1596 | 2008-08 |
|
Jong-Hyun Lee, A-Mi Yu, Jeong-Han Kim, Mok-Soon Kim, and Namhyun Kang | Reaction Properties and Interfacial Intermetallics for Sn-xAg-0.5Cu Solders as a Function of Ag Content | METALS AND MATERIALS International | 1598-9623 | 1.434 | 14 | 5 | 649-654 | 2008-10 | 19 |
Sang-Soon Park, Ki-Hong Kim, Nam-Hyun Kang, Young-Seok Kim, Young-Mok Rhym Yung-Min Choi5, and Yeong-Do Park | Resistance Spot Weldability of Surface Roughness Textured Galvannealed Steel Sheets | Journal of the Korean Institute of Metals and Materials |
|
|
46 | 8 | 495-505 | 2008 |
|
Namhyun Kang, Hye Sung Na, Seong Jun Kim, Chung Yun Kang | Alloy design of Zn?Al?Cu solder for ultra high temperatures | Journal of Alloys and Compounds | 0925-8388 | 2.39 | 467 |
|
246-250 | 2009-01 | 34 |
N. Kang, Y. Lee, S. Byun, K. Kim, K. Kim, J. Chung, K. Cho | Quantitative analysis of microstructural and mechanical behavior for Fe?0.1C?(V, Nb) steels as a function of the final rolling temperature | Materials Science and Engineering A | 0921-5093 | 2.108 | 499 |
|
157-161 | 2009-01 |
|
Dae-Geun Nam, Namhyun Kang, Young-Seok Kim, and Hu-Chul Lee | Microstructure of Chromium Nitride Layer on Stainless Steel for Polymer Electrolyte Membrane Fuel Cell Separator | KOREAN JOURNAL OF METALS AND MATERIALS | 1738-8228 | 1.201 | 15 | 2 | 273-278 | 2009-04 |
|
Kwang-Ryul Kim, Junsin Yi, Sung-Hak Cho, Nam-Hyun Kang, Myung-Woo Cho d, Bo-Sung Shin, Byoungdeog Choi | SLM-based maskless lithography for TFT-LCD | Applied Surface Science | 0169-4332 | 2.112 | 255 |
|
7835-7840 | 2009-05 |
|
W.J. Lee, J.H. Son, N.H. Kang, I.M. Park and Y.H. Park | Finite-element analysis of deformation behaviors in randomwhisker-reinforced composite | Scripta Materialia | 1359-6462 | 2.821 | 61 |
|
580-583 | 2009-05 |
|
W.J. Lee, J.H. Son, N.H. Kang, I.M. Park and Y.H. Park | Finite-element analysis of deformation behaviors in randomwhisker-reinforced composite | Scripta Materialia | 1359-6462 | 2.821 | 61 |
|
580-583 | 2009-05 |
|
Chang Hyun Ko, Jong-Seong Bae, Jeong Hyun Yeum, Namhyun Kang, Yeong-Do Park, Young-Seok Kim, Jae-Won Lee, Sankar Nair and Weontae Ohi | Application of photoacoustic spectroscopy to spatially resolved, non-destructive measurements of organics distributed in zeolite membranes | Journal of Ceramic Processing Research | 1229-9162 | 0.333 | 9 |
|
9-13 | 2009-10 |
|
Iman Maroef1, Yeong-Do Park, Dae-Geun Nam, Young-Seok Kim, Yongjoon Cho, Namhyun Kang, Young-Mok Rhym, Ji-Hun Yu, and David L. Olson | Study on the Initiation of a Thermite Reaction in Aluminum Coated Steel with a High-Velocity Impact | KOREAN JOURNAL OF METALS AND MATERIALS | 1738-8228 | 1.201 | 15 | 5 | 851-856 | 2009-10 |
|
Jae-Myeong Jang, Sung-Joon Kim, Nam Hyun Kang, Kyung-Mox Cho, and Dong-Woo Suh | Effects of Annealing Conditions on Microstructure and Mechanical Properties of Low Carbon, Manganese Transformation-Induced Plasticity Steel | KOREAN JOURNAL OF METALS AND MATERIALS | 1738-8228 | 1.201 | 15 | 6 | 909-916 | 2009-12 |
|
Dae-Geun Nam, Chang-Yong Choi, Jae-Ho Jang, and Young-Do Park, Namhyun Kang | PEM Fuel Cell Separator with Thermally Nitrided Low Carbon Steel | Materials Science Forum | 0255-5476 | N/A | 654-656 |
|
1823-1825 | 2010-10 |
|
Jin Beom Lee, Namhyun Kang, Ji Tae Park, Soon-Tae Ahn, Yeong-Do Park, Il-Dong Choi, Dae-Geun Nam, and Kyung-mox Cho | Tensile Properties of Energy Saving Wire (ESW) with respect to Temperatures of High Frequency Induction Heat Treatment | KOREAN JOURNAL OF METALS AND MATERIALS | 1738-8228 | 1.201 | 48 | 11 | 974-980 | 2010-11 |
|
W. J. Lee, Y. J. Kim, N. H. Kang, I. M. Park and Y. H. Park | FINITE-ELEMENT MOD ELING OF THE PAR TICLE CLUS TERING EFFECT IN A POW DER-MET AL LURGY-PRO CESSED CE RAMIC-PAR TI CLE-RE IN FORCED METAL MA TRIX COM POS ITE ON ITS ME CHAN I CAL PROPERTIES | MECHANICS OF COMPOSITE MATERIALS | 0191-5665 | 0.436 | 46 | 6 |
|
2010-11 |
|
B.H. Kim, N.H. Kang, W.T. Oh, C.H. Kim, and J.H. Kim, Y.S. Kim and Y.H. Park | Effects of Weaving Laser on Weld Microstructure and Crack for Al 6k21-T4 Alloy | journal of mechanical science and technology | 1738-494 | 0.616 | 27 |
|
93-96 | 2011-01 |
|
Jin-Beom Lee, Dong-Cheol Kim, Dae-Geun Nam, Nam Hyun Kang, Soon-Kook Kim, Ji-Hun Yu, YoungMok Rhym, and Yeong-Do Park | Assessment of Resistance Spot Weldability of Dissimilar Joints of Austenitic Stainless Steels/IF Steels and Ferritic Stainless Steels/IF Steels | KOREAN JOURNAL OF METALS AND MATERIALS | 1738-8228 | 1.201 | 49 | 1 | 64-72 | 2011-01 |
|
Jeong Gu Kang, Hyun Uk Hong, Baig Gyu Choi, In Soo Kim, Nam Hyun Kang, and Chang Yong Jo | Deformation and Failure Behavior during Thermo-Mechanical Fatigue of a Nickel-Based Single Crystal Superalloy | KOREAN JOURNAL OF METALS AND MATERIALS | 1738-8228 | 1.201 | 49 | 2 | 112-120 | 2011-02 |
|
Y. H. Kim, D. G. Kim,J. H. Sung,I. S. Kim, D. E. Ko,N. H. Kang,H. U. Hong, J. H. Park, and H. W. Lee | Influences of Cr/Ni Equivalent Ratios of Filler Wires on Pitting Corrosion and Ductility-Dip Cracking of AISI 316L Weld Metals | KOREAN JOURNAL OF METALS AND MATERIALS | 1738-8228 | 1.201 | 17 | 1 | 151-155 | 2011-02 |
|
Do-Yeal Ryoo, Namhyun Kang, Chung-Yun Kangb | Effect of Ni content on the tensile properties and strain-induced martensite transformation for 304 stainless steel | Materials Science and Engineering A | 0921-5093 | 2.108 | 528 |
|
2577-2581 | 2011-03 |
|
Jun-Sik LEE, Jun-Ki KIM, Mok-Soon KIM, Namhyun KANG, Jong-Hyun LEE | Reliability of flip-chip bonded RFID die using anisotropic conductive paste hybrid material | Transactions of Nonferrous Metals Society of China | 1003-6326 | 0.917 | 21 |
|
|
2011-03 |
|
Suk-Kyu Lee, Jong-Sang Kim, Jin-Won Choi, Namhyun Kang, and Kyung-Mox Cho | ffects of Dew Point on Selective Oxidation of TRIP Steels Containing Si, Mn, and B | KOREAN JOURNAL OF METALS AND MATERIALS | 1738-8228 | 1.201 | 17 | 2 | 251-257 | 2011-09 |
|
MHKim,HJ Kim, JHHan, JMLee, YDKim,NHKang,MJ Kang, and CHKim | Influence of backing materials towards the fatigue strength of butt-welded joints | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE | 0954-4062 | 0.633 | 225 |
|
|
2011-11 |
|
Hee Jae Kang, Tae Woo Lee, Byung Hyun Yoon, Seo Jeong Park, Woong Seong Chang, Kyung Mox Cho, and Namhyun Kang | Microstructural Effects on Hydrogen Delayed Fracture of 600MPa and 800MPa grade Deposited Weld Metal | KOREAN JOURNAL OF METALS AND MATERIALS | 1738-8228 | 1.201 | 50 | 1 | 52-58 | 2012-01 |
|
Sang-Ho Byun, Namhyun Kang, Tae-Ho Lee, Sang-Kon Ahn3, Hae Woo Lee, Woong-Seong Chang, and Kyung-Mox Cho | Kinetics of Cr/Mo-rich Precipitates Formation for 25Cr-6.9Ni-3.8Mo-0.3N Super Duplex Stainless Steel | KOREAN JOURNAL OF METALS AND MATERIALS | 1738-8228 | 1.201 | 18 | 2 | 201-207 | 2012-04 |
|
Hee Jae Kang, Jae Seok Yoo, Ji Tae Park, Soon Tae Ahn, Namhyun Kang, Kyung-Mox Cho | Effect of nano-carbide formation on hydrogen-delayed fracture for quenching and tempering steels during high-frequency induction heat treatment | Materials Science and Engineering A | 0921-5093 | 2.108 | 543 |
|
6-11 | 2012-05 | 3 |
Eun-Joon Chun, Ju-Seung Lee, Hyeonghyeop Do, Seong-Ju Kim, Yoon-Suk Choi, Yong-Ho Park, and Namhyun Kang | Effects of Coiling Temperature and Carbides Behavior on Stretch-flangeability for 980MPa Hot-rolled Steels | KOREAN JOURNAL OF METALS AND MATERIALS | 1738-8228 | 1.201 | 50 | 7 | 487-493 | 2012-07 |
|
Yong Hwan Song, Joo-Hee Kang, Chan Hee Park, Seong-Woong Kim, Yong-Taek Hyun, Nam Hyun Kang, and Jong-Taek Yeom | Microstructure Evolution of Ti-6Al-4Fe-0.25Si through Aging Heat Treatment | KOREAN JOURNAL OF METALS AND MATERIALS | 1738-8228 | 1.201 | 50 | 7 | 477-485 | 2012-07 |
|
Suk-Kyu Lee, Jong-Sang Kim, Namhyun Kang, and Kyung-Mox Cho | Effects of Furnace Atmosphere on Selective Oxidation Behaviour of Si-Added Transformation-Induced Plasticity Steels | KOREAN JOURNAL OF METALS AND MATERIALS | 1738-8228 | 1.201 | 18 | 6 | 951-956 | 2012-12 |
|
C. Kim, M. Kang, N. Kang | Solidification crack and morphology for laser weave welding of Al 5J32 alloy | Science and Technology of Welding and Joining | 1362-1718 | 1.274 | 18 | 1 | 57-61 | 2013.01 | 1 |
Ga Young Yoo, Chan Hee Park, Jae-Keun Hong, Seong-Eun Kim, Nam Hyun Kang, and Jong-Taek Yeom | Effect of Beta Stabilizer Content on Young’s Moduli of Titanium Alloys with Similar Electronic States | KOREAN JOURNAL OF METALS AND MATERIALS | 1738-8228 | 1.201 | 51 | 4 | 307-315 | 2013.04 | 0 |
Eun Joon Chun, Hyeonghyeop Do, Seongju Kim, Dae-Geun Nam, Yong-Ho Park, Namhyun Kang | Effect of nanocarbides and interphase hardness deviation on stretch-flangeability in 998 MPa hot-rolled steels | Materials Chemistry and Physics | 0254-0584 | 2.072 | 140 | 1 | 307-315 | 2013-06 |
|
Ju-Seung Lee, Myung-Jin Lee, Hyeonghyeop Do, Seong-Ju Kim, Namhyun Kang | Effect of Tempered Martensite matrix and Granular Bainite on stretch-flangeability for 980MPa hot-rolled steel | KOREAN JOURNAL OF METALS AND MATERIALS | 1738-8228 | 1.201 | 52 | 2 | 113-121 | 2014-02 | 0 |
Jae-Won Kim, NamHyun Kang, Yeong-Do Park, DongCheol Kim, MoonJin Kang | Effect of Strength Grades of Dual Phase Steels on Failure Location and Joint Efficiency of GMAW Lap Joint | KOREAN JOURNAL OF METALS AND MATERIALS | 1738-8228 | 1.201 | 52 | 4 | 319-326 | 2014-04 | 0 |
Beomjun Kim, Chang-Woo Lee, Dongyun Lee, Namhyun Kang | Effect of Sb addition on Bi-2.6Ag-0.1Cu solders for high-temperature applications | JOURNAL OF ALLOYS AND COMPOUNDS | 0925-8388 |
|
592 |
|
207-212 | 2014-04 | 17 |
Seonggyeong Kim, Namhyun Kang, Junyun Kang, Heonyoung Ha, Changdong Yim, Nojin Park | Study of Secondary Recrystallization in Mg-Sn Binary Alloy | KOREAN JOURNAL OF METALS AND MATERIALS | 1738-8228 |
|
52 |
|
429-438 | 2014-06 |
|
Hoin Jun, Yiseol Kim, Sangjun Lee, Namhyun Kang, Kyoungbo Kim, Moojin Kim, Soohyung Kim, Dongyun Lee | Anomalous multiple pop-in behavior in Cu-Sn-based intermetallic compounds during nanoindentation | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 0921-5093 |
|
612 |
|
192-196 | 2014-08 | 8 |
Jeongwon Ha, Baekseok Seong, Hiwon Jeong, Youngsoo Yoo, Yoonsuk Choi, Namhyun Kang | Effect of cold drawing ratio on γ′ precipitation in Inconel X-750 | MATERIALS CHARACTERIZATION | 1044-5803 |
|
96 |
|
1-5 | 2014-10 | 4 |
Yumi Jo, Kwangseok Lee, Youngseon Lee, Namhyun Kang | Influence of annealing on the interface-correlated mechanical properties of a Ti/STS clad sheet | KOREAN JOURNAL OF METALS AND MATERIALS | 1738-8228 |
|
52 | 11 | 881-891 | 2014-11 | 5 |
Jeongwon Ha, Baekseok Seong, Hi Won Jeong, Yoon Suk Choi, Namhyun Kang | Effects of the aging temperature and stress relaxation conditions on gamma ' precipitation in Inconel X-750 | JOURNAL OF NUCLEAR MATERIALS | 0022-3115 |
|
457 |
|
362-368 | 2015-02 | 2 |
Mingu Park, Joonoh Moon, Taeho Lee, Namhyun Kang, Hyoungchan Kim, Changhoon Lee | Effect of Microstructures and Tempering Heat Treatment on the Mechanical Properties of 9Cr-2W Reduced-Activation Ferritic-Martensitic Steel | KOREAN JOURNAL OF METALS AND MATERIALS | 1738-8228 |
|
53 | 5 | 312-319 | 2015-05 |
|
Guo Xian, Myungjin Lee, Junghoon Lee, Namhyun Kang | Effect of Shield Gas Composition on Cold Cracking Susceptibility of YS 600 MPa Flux Cored Arc Weld Metal | KOREAN JOURNAL OF METALS AND MATERIALS | 1738-8228 |
|
53 | 7 | 480-487 | 2015-07 | 1 |
Myungjin Lee, Kyungmok Cho, Yongdeok Kim, Namhyun Kang | Effect of martensite on cold cracking in 600-MPa grade flux-cored arc weld metals using the Y-groove test | WELDING IN THE WORLD | 0043-2288 |
|
59 | 5 | 647-654 | 2015-09 | 2 |
Sungyong Ahn, Myeongjin Lee, Kyungmok Cho, Namhyun Kang | Effects of PWHT Time on Pitting Behavior in Modified 9Cr-1Mo Steel Welds | KOREAN JOURNAL OF METALS AND MATERIALS | 1738-8228 |
|
53 | 11 | 785-792 | 2015-11 |
|
Shu Liu, Namhyun Kang, Lun Feng, Seahoon Lee, Jihun Yu, Jung-Goo Lee | Anisotropic Nanocrystalline Nd-Fe-B-Based Magnets Produced by Spark Plasma Sintering Technique | IEEE TRANSACTIONS ON MAGNETICS | 0018-9464 |
|
51 | 11 |
|
2015-11 |
|
Shu Liu, Namhyun Kang, Jihun Yu, Haewoong Kwon, Jung-Goo Lee | Effect of Grain Boundary Modification on the Microstructure and Magnetic Properties of HDDR-treated Nd-Fe-B Powders | Journal of Magnetics | 1226-1750 |
|
21 | 1 | 51-56 | 2016-03 |
|
Myungjin Lee, Kyungmok Cho,Namhyun Kang | Effect of Preheat Temperature and Microstructure on Cold Cracking in 600 MPa Grade Flux Cored Are Weld Metal | KOREAN JOURNAL OF METALS AND MATERIALS | 1738-8228 |
|
54 | 4 | 252-260 | 2016-04 |
|
Kyunghoon Lee, Namhyun Kang, Jongseong Bae, Changwoo Lee | Microstructural behavior of nitriding compound layer for Nb-carbonitride coating grown by thermo-reactive diffusion process | METALS AND MATERIALS INTERNATIONAL | 1598-9623 |
|
22 | 5 | 842-848 | 2016-09 | 1 |
Myungjin Lee, Namhyun Kang, Shu Liu, Kyungmok Cho | Effects of inclusion size and acicular ferrite on cold cracking for high-strength steel welds of YS 600?MPa grade | SCIENCE AND TECHNOLOGY OF WELDING AND JOINING | 1362-1718 |
|
21 | 8 | 711-719 | 2016-11 | 1 |
Minhyeok Heo, Namhyun Kang, Seonghun Park, Junki Kim, Wonsik Hong | Kinetics of Intermetallic Compounds Growth Induced by Electromigration of Sn-0.7Cu Solder | KOREAN JOURNAL OF METALS AND MATERIALS | 1738-8228 |
|
54 | 12 | 908-915 | 2016-12 | 2 |
Min-Gu Park, Chang-Hoon Lee, Joonoh Moon, Jun Young Park, Tae-Ho Lee, Namhyun Kang, Hyoung Chan Kim | Effect of microstructural evolution by isothermal aging on the mechanical properties of 9Cr-1WVTa reduced activation ferritic/martensitic steels | JOURNAL OF NUCLEAR MATERIALS | 0022-3115 | 2.05 | 485 |
|
15-22 | 2017-03 |
|
Jeong Won Ha, Baek Seok Seong, Wanchuck Woo, Hi Won Jeong, Yoon Suk Choi, Namhyun Kang | Effects of gamma' Precipitation, Dislocation Density, and Grain Size on Stress-Relaxation Properties of INCONEL X-750 Helical Springs | METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 1073-5623 | 1.87 | 48A | 8 | 3665-3674 | 2017-08 |
|
Vijeesh Vijayan, Nazmul Huda, Siva Prasad Murugan, Changyoung Jeong, Seung Man Noh, Namhyun Kang, Yeong-Do Park | The weldability study of carbon nanotube based 2nd generation primer coated steel for automotive applications | JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY | 1738-494X |
|
31 | 9 | 4405-4410 | 2017-09 |
|
Juseung Lee, Dongyun Lee, Myungjin Lee, Chulho Park, Yeong Do Park, Namhyun Kang | Effect of Interphase Hardness and Elastic Modulus on Fracture Behavior during Hole Expansion Testing of Hot-Rolled Steels with Low-Temperature Transformation Microstructures | STEEL RESEARCH INTERNATIONAL | 1611-3683 | 1.25 | 88 | 11 | 17000161-17000168 | 2017-11 |
|
Cheolho Park, Namhyun Kang, Stephen Liu | Effect of grain size on the resistance to hydrogen embrittlement of API 2W Grade 60 steels using in situ slow-strain-rate testing | CORROSION SCIENCE | 0010-938X | 5.25 | 128 |
|
33-41 | 2017-11 |
|
Chang-Hoon Lee, Jun-Young Park, Woo-Kyoung Seol, Joonoh Moon, Tae-Ho Lee, Namhyun Kang, Hyoung Chan Kim | Microstructure and tensile and Charpy impact properties of reduced activation ferritic?martensitic steel with Ti | FUSION ENGINEERING AND DESIGN | 0920-3796 | 1.32 | 124 |
|
953-957 | 2017-11 |
|
Hyunbin Nam, Cheolho Park, Cheolhee Kim, Hyoungseop Kim, Namhyun Kang | Effect of post weld heat treatment on weldability of high entropy alloy welds | SCIENCE AND TECHNOLOGY OF WELDING AND JOINING | 1362-1718 |
|
1 |
|
1-8 | 2017-12 |
|
In Kim, Myungjin Lee, Yoonsuk Choi, Namhyun Kang | Effects of Mo Content on Low-Angle Misorientation Microstructure and Mechanical Properties of YS 550 MPa-Grade Steels for Offshore Structures | STEEL RESEARCH INTERNATIONAL | 1611-3683 | 1.24 | 88 | 11 | 17000161-17000168 | 2017-12 |
|
Yujin Park, Jung-Hwan Bang, Chul Min Oh, Won Sik Hong, Namhyun Kang | The effect of eutectic structure on the creep properties of Sn-3.0Ag-0.5Cu and Sn-8.0Sb-3.0Ag Solders | METALS | 2075-4701 |
|
7 | 12 | 1-12 | 2017-12 |
|
Tae-Hoon Nam, Eunso An, Byung Jun Kim, Sunmi Shin, Won-seok Ko, Nokeun Park, Namhyun Kang, and Jong Bae Jeon |
Effect of post weld heat treatment on the microstructure and mechanical properties of a submerged-arc-welded 304 stainless steel |
METALS |
2075-4701 |
|
8 |
1 |
1-13 |
2018-01 |
21 |
In Kim, Myungjin Lee, Yoonsuk Choi, Namhyun Kang |
Effects of Mo Content on Low-Angle Misorientation Microstructure and Mechanical Properties of YS 550 MPa-Grade Steels for Offshore Structures |
STEEL RESEARCH INTERNATIONAL |
1611-3683 |
|
89 |
2 |
1700278-1700278 |
2018-02 |
10 |
Jaeho Jang, Changyong Choi, Jungsoo Kim, Yeong-Do Park, Namhyun Kang, Yoon Suk Choi, and Dae-Geun Nam |
Surface Characterization of Chromium Nitrided Low Carbon Steel as Bipolar Plate for Polymer Electrolyte Membrane Fuel Cell |
SCIENCE OF ADVANCED MATERIALS |
1947-2935 |
|
10 |
2 |
206-209 |
2018-02 |
5 |
Nam-hun Jung, Jang-ho Ahn, Myung-jin Lee, Nam-hyun Kang, Kyung-Mox Cho |
Formation Behavior of delta Ferrite Within LB and GTA Weld Zones of Mod. 9Cr-1Mo Steel in Terms of Thermal History |
KOREAN JOURNAL OF METALS AND MATERIALS |
1738-8228 |
|
56 |
2 |
93-102 |
2018-02 |
4 |
Hyunbin Nam, Chulho Park, Cheolhee Kim, Hyoungseop Kim, Namhyun Kang |
Effect of post weld heat treatment on weldability of high entropy alloy welds |
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING |
1362-1718 |
|
23 |
5 |
420-427 |
2018-05 |
47 |
Kyeongmo Park, Jun-Ho Kim, Sunkwang Kim, Namhyun Kang |
Multilayer-forming behavior of Cr nitrides and carbides for thermoreactive deposition |
METALS |
2075-4701 |
|
8 |
6 |
400-400 |
2018-05 |
3 |
Eun-Joon Chun, Ahjin Sim, Min-Su Kim, Namhyun Kang |
Microstructural characterization of surface softening behavior for Cu-bearing martensitic steels after laser surface heat treatment |
METALS |
2075-4701 |
|
8 |
6 |
470-470 |
2018-06 |
13 |
In Kim, Hyunbin Nam, Myungjin Lee, Daegeun Nam, Yeongdo Park, Namhyun Kang |
Effect of martensite–austenite constituent on low-temperature toughness in YS 500 MPa grade steel welds |
METALS |
2075-4701 |
|
8 |
8 |
638-638 |
2018-08 |
16 |
Yool Byun, Sangwon Lee, Seong-Moon Seo, Jong-taek Yeom, Seung Eon Kim, Namhyun Kang, Jaekeun Hong |
Effects of Cr and Fe Addition on Microstructure and Tensile Properties of Ti–6Al–4V Prepared by Direct Energy Deposition |
METALS AND MATERIALS INTERNATIONAL |
1598-9623 |
|
24 |
6 |
1213-1220 |
2018-11 |
16 |
Jeonga Kim, Cheolho Park, Kyung-Mox Cho, Wonsik Hong, Jung-Hwan Bang, Yong-Ho Ko, Namhyun Kang |
Oxidation and Repeated-Bending Properties of Sn-Based Solder Joints After Highly Accelerated Stress Testing (HAST) |
Electronic Materials Letters |
1738-8090 |
|
14 |
6 |
678-688 |
2018-11 |
3 |
Jeong Mok Oh, Joo-Hee Kang, Sangwon Lee, Sung-Dae Kim, Namhyun Kang, Chan Hee Park |
Origin of superproperties of Ti-23Nb-1Ta-2Hf-O alloy |
MATERIALS LETTERS |
0167-577X |
|
233 |
|
162-165 |
2018-12 |
7 |
Jeong-Yong Lee, Hoejun Heo, Namhyun Kang, and Chung-Yun Kang |
Microstructural Evolution of Reaction Layer of 1.5 GPa Boron Steel Hot-Dipped in Al-7wt%Ni-6wt%Si Alloy |
METALS |
2075-4701 |
|
8 |
12 |
1-16 |
2018-12 |
|
Cheolho Park, Namhyun Kang, Myunghyun Kim, Stephen Liu |
Effect of prestrain on hydrogen diffusion and trapping in structural steel |
MATERIALS LETTERS |
0167-577X |
|
235 |
|
193-196 |
2019-01 |
28 |
Sangwon Park, Chulho Park, Youngsang Na, Hyoung-Seop Kim, Namhyun Kang |
Effects of (W, Cr) carbide on grain refinement and mechanical properties for CoCrFeMnNi high entropy alloys |
JOURNAL OF ALLOYS AND COMPOUNDS |
0925-8388 |
|
770 |
|
222-228 |
2019-01 |
36 |
Su-Kil Park, Young-Ho Cho, Chun-Ho Jee, Junghoon Lee, Seong-Moon Seo, Namhyun Kang |
Influence of Boron and Manganese on Hot Crack Resistance and Low Temperature Toughness of Flux Cored Arc Weld Metal for High Strength Carbon Steels |
KOREAN JOURNAL OF METALS AND MATERIALS |
1738-8228 |
|
57 |
1 |
28-37 |
2019-01 |
1 |
Sung-Min Baek, Yujin Park, Cheolmin Oh, Eun-Joon Chun, Namhyun Kang |
Modeling and Experimental Verification of Intermetallic Compounds Grown by Electromigration and Thermomigration for Sn-0.7Cu Solders |
JOURNAL OF ELECTRONIC MATERIALS |
0361-5235 |
|
48 |
1 |
142-151 |
2019-01 |
7 |
Eun-Joon Chun, Jung-Hoon Lee, Namhyun Kang |
Unmixing behaviour in dissimilar laser welds for duplex and austenitic stainless steels |
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING |
1362-1718 |
|
24 |
3 |
263-275 |
2019-02 |
1 |
Hyunbin Nam, Chulho Park, Jongun Moon, Youngsang Na, Hyoungseop Kim, Namhyun Kang |
Laser weldability of cast and rolled high-entropy alloys for cryogenic applications |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
0921-5093 |
|
742 |
|
224-230 |
2019-02 |
46 |
Chi-Hyoung Won, Jae-Hoon Jang, Chang-Hoon Lee, Tae-Ho Lee, Namhyun Kang |
Computational Modeling for Coarsening of (Fe,Cr)(2)B in Borated Stainless Steel |
MATERIALS TRANSACTIONS |
1345-9678 |
|
60 |
2 |
369-372 |
2019-02 |
4 |
Chi-Hyoung Won, Jae Hoon Jang, Sung-Dae Kim, Joonoh Moon, Heon-Young Ha, Jun-Yun Kang, Chang-Hoon Lee, Tae-Ho Lee, Namhyun Kang |
Effect of annealing on mechanical properties and microstructure evolution of borated stainless steels |
JOURNAL OF NUCLEAR MATERIALS |
0022-3115 |
|
515 |
|
206-214 |
2019-03 |
16 |
Cheolho Park, Namhyun Kang, Stephen Liu, Juseung Lee, Eunjoon Chun, Sun-Joon Yoo |
Effect of Prestrain on Hydrogen Embrittlement Susceptibility of EH 36 Steels Using In Situ Slow-Strain-Rate Testing |
METALS AND MATERIALS INTERNATIONAL |
1598-9623 |
|
25 |
3 |
584-593 |
2019-05 |
25 |
Minjeong Kim, Yongjoon Kang, Namkyu Kim, Sanghoon Lee, Sangwoo Song, Namhyun Kang |
PWHT Cracking Susceptibility in the HAZ of Martensitic 10Cr Steel for A-USC Power Plant |
KOREAN JOURNAL OF METALS AND MATERIALS |
1738-8228 |
|
57 |
7 |
430-437 |
2019-06 |
6 |
Byungrok Moon, Junghoon Lee, Namhyun Kang, Taeho Lee, Woosang Jung, Chulgyu Park, Kyungmox Cho |
Effect of Carbides Formed in 9Cr-1Mo-V-Nb Weld Metals on Elevated Temperature Tensile Strength |
KOREAN JOURNAL OF METALS AND MATERIALS |
1738-8228 |
|
57 |
7 |
422-429 |
2019-07 |
1 |
Junghoon Lee, Myeonghyun Kim, Yeongdo Park, Cheolho Park, Cheolhee Kim, Namhyun Kang |
Hydrogen-induced cracking of laser beam and gas metal arc welds on API X65 steel |
KOREAN JOURNAL OF METALS AND MATERIALS |
1738-8228 |
|
57 |
8 |
491-498 |
2019-07 |
2 |
Ahjin Sim, Chankyoo Park, Namhyun Kang, Yangdo Kim, Eun-Joon Chun |
Effect of laser-assisted nitriding with a high-power diode laser on surface hardening of aluminum-containing martensitic steel |
OPTICS AND LASER TECHNOLOGY |
0030-3992 |
|
116 |
|
305-314 |
2019-08 |
13 |
Daniyal Abolhasani, S.M. Hossein Seyedkashi, Namhyun Kang, Yang Jin Kim, Young Yun Woo, Young Hoon Moon |
Analysis of Melt-Pool Behaviors during Selective Laser Melting of AISI 304 Stainless-Steel Composites |
METALS |
2075-4701 |
|
9 |
8 |
1-8 |
2019-08 |
13 |
Jeong Yeol Park, Nam Hyun Kang, Myung Hyun Kim |
Effects of the welding processes and consumables on the fatigue and fracture performances for 3.5 wt.% nickel steels |
WELDING IN THE WORLD |
0043-2288 |
|
63 |
5 |
1355-1367 |
2019-09 |
|
Hanme Yoon, Heon-Young Ha, Tae-Ho Lee, Sung-Dae Kim, Jae Hoon Jang, Joonoh Moon, Namhyun Kang |
Pitting Corrosion Resistance and Repassivation Behavior of C-Bearing Duplex Stainless Steel |
METALS |
2075-4701 |
|
9 |
9 |
1-13 |
2019-09 |
7 |
Jae-Won Kim, Siva Prasad Murugan, Nam Hyun Kang, and Yeong-Do Park |
Study on the Effect of the Localized Electrode Degradation on Weldability During an Electrode Life Test in Resistance Spot Welding of Ultra-High Strength Steel |
KOREAN JOURNAL OF METALS AND MATERIALS |
1738-8228 |
|
57 |
11 |
715-725 |
2019-11 |
|
Jin-Young Choi, Joonoh Moon, Byung Hwan Kim, Jae Hoon Jang, Tae-Ho Lee, Hyun-Uk Hong, Hyoung Chan Kim, Chang-Hoon Lee, Nam Hyun Kang |
Tensile and Charpy impact properties of reduced activation ferritic/martensitic steel with small amounts of Ta and Ti |
JOURNAL OF NUCLEAR MATERIALS |
0022-3115 |
|
528 |
|
1-6 |
2020-01 |
6 |
Jeong Mok Oh, Chan Hee Park, Jong-Taek Yeom, Jae-Keun Hong, Namhyun Kang, Sang Won Lee |
High strength and ductility in low-cost Ti-Al-Fe-Mn alloy exhibiting transformation-induced plasticity |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
0921-5093 |
|
772 |
|
138813-138813 |
2020-01 |
14 |
Myeonghwan Choi, Junghoon Lee, Hyunbin Nam, Namhyun Kang, Myeonghyun Kim, Daewon Cho |
Tensile and Microstructural Characteristics of Fe-24Mn Steel Welds for Cryogenic Applications |
METALS AND MATERIALS INTERNATIONAL |
1598-9623 |
|
26 |
2 |
240-247 |
2020-02 |
21 |
Hyunbin Nam, Sangwon Park, Eun-Joon Chun, Hyoungseop Kim, Youngsang Na, Namhyun Kang |
Laser dissimilar weldability of cast and rolled CoCrFeMnNi high-entropy alloys for cryogenic applications |
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING |
1362-1718 |
|
25 |
2 |
127-134 |
2020-02 |
23 |
Sunghyun Sohn, Byungrok Moon, Junghoon Lee, Namhyun Kang, Younghoon Moon |
Interlayer Material Design Reducing Transient Liquid Phase Bonding Time |
Electronic Materials Letters |
1738-8090 |
|
16 |
2 |
106-114 |
2020-03 |
5 |
HanMe Yoon, Heon-Young Ha, Sung-Dae Kim, Tae-Ho Lee, Jae Hoon Jang, Joonoh Moon, Namhyun Kang |
Effects of carbon substitution for nitrogen on the pitting corrosion resistance of type UNS S32205 duplex stainless steel |
CORROSION SCIENCE |
0010-938X |
|
164 |
|
108308-108308 |
2020-03 |
6 |
Junghoon Lee, Cheolho Park, Hanji Park, Namhyun Kang |
Effective hydrogen diffusion coefficient for CoCrFeMnNi high-entropy alloy and microstructural behaviors after hydrogen permeation |
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY |
0360-3199 |
|
45 |
16 |
10227-10232 |
2020-03 |
17 |
Hyunbin Nam, Sangwon Park, Nokeun Park, Youngsang Na, Hyoungseop Kim, Sun-Joon Yoo, Young-Hoon Moon, Namhyun Kang |
Weldability of cast CoCrFeMnNi high-entropy alloys using various filler metals for cryogenic applications |
JOURNAL OF ALLOYS AND COMPOUNDS |
0925-8388 |
|
819 |
|
153278-153278 |
2020-04 |
23 |
Yookyung Kim, Hyunbin Nam, Junghun Lee, Chulho Park, Byungrok Moon, Dae-Geun Nam, Seung Hwan Lee, Namhyun Kang |
Hot-cracking resistivity of dissimilar clads using Inconel 52 and 308L stainless steel on carbon steel |
JOURNAL OF NUCLEAR MATERIALS |
0022-3115 |
|
533 |
|
152103-152103 |
2020-05 |
4 |
Sangwon Park, Hyunbin Nam, Youngsang Na, Hyoungseop Kim, Younghoon Moon, Namhyun Kang |
Effect of Initial Grain Size on Friction Stir Weldability for Rolled and Cast CoCrFeMnNi High‑Entropy Alloys |
METALS AND MATERIALS INTERNATIONAL |
1598-9623 |
|
26 |
5 |
641-649 |
2020-05 |
20 |
Chang-Kyoo Park, Jung-Hoon Lee, Nam-Hyun Kang, Eun-Joon Chun |
Correlation between microstructure and tribological properties of laser surface heat-treated stellite coatings |
COATINGS |
2079-6412 |
|
10 |
5 |
1-14 |
2020-05 |
6 |
Jeong Mok Oh, Jae-Keun Hong, Jong-Taek Yeom, Sang Won Lee, Eun-Young Kim, Namhyun Kang, Chan Hee Park |
Accelerated formation of an ultrafine-grained structure in a two-phase Ti alloy during compression with decreasing temperatures |
PHILOSOPHICAL MAGAZINE |
1478-6435 |
|
100 |
12 |
1569-1584 |
2020-06 |
1 |
Yookyung Kim, Byungrok Moon, Namhyun Kang, Eun-Joon Chun |
Effect of Cladding Conditions on Solidification Cracking Behavior during Dissimilar Cladding of Inconel Alloy FM 52 and 308L Stainless Steel to Carbon Steel: Evaluation of Solidification Brittle Temperature Range by Transverse-Varestraint Test |
KOREAN JOURNAL OF METALS AND MATERIALS |
1738-8228 |
|
58 |
6 |
403-412 |
2020-06 |
|
Sangwon Park, Hyunbin Nam, Jeongmin Park, Youngsang Na, Hyoungseop Kim, Namhyun Kang |
Superior-tensile property of CoCrFeMnNi alloys achieved using friction-stir welding for cryogenic applications |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
0921-5093 |
|
788 |
|
139547-139547 |
2020-06 |
16 |
Jaewoong Kim, Seulbi Lee, Jae-Keun Hong, Namhyun Kang and Yoon Suk Choi |
Calibration of Laser Penetration Depth and Absorptivity in Finite Element Method Based Modeling of Powder Bed Fusion Melt Pools |
METALS AND MATERIALS INTERNATIONAL |
1598-9623 |
|
26 |
6 |
891-902 |
2020-06 |
5 |
Jinhyeok Bang, Yongjoon Kang, Namkyu Kim, Seong-Moon Seo, Sanghoon Lee, Sangwoo Song, Namhyun Kang |
Effect of Aging Heat Treatment Conditions on the Mechanical Properties and Microstructure of Base and Weld Metal of Alloy 282 Superalloy |
KOREAN JOURNAL OF METALS AND MATERIALS |
1738-8228 |
|
58 |
8 |
540-549 |
2020-08 |
1 |
Namyong Kim, Dae-Cheol Ko, Namhyun Kang, ll Yeong Oh, Chester J. VanTyne, Young Hoon Moon |
Feasibility of using Continuously Cast Round Bloom as a Substitute to Cast Ingot in the Manufacture of Heavy Forgings |
STEEL RESEARCH INTERNATIONAL |
1611-3683 |
|
91 |
9 |
2000079 |
2020-09 |
2 |
Hyunbin Nam, Seonghoon Yoo, Junghoon Lee, Youngsang Na, Nokeun Park, Namhyun Kang |
GTA weldability of rolled high-entropy alloys using various filler metals |
METALS |
2075-4701 |
|
10 |
10 |
1-10 |
2020-10 |
3 |
Tae Woo Hwang, Namhyun Kang, Chester J. Vantyne, Yong-Tae Kim, Taekyung Lee, Young Hoon Moon |
Microforming of fine metallic rods by the selective laser melting of powder |
Additive Manufacturing |
2214-8604 |
|
36 |
|
101612-101612 |
2020-12 |
3 |
Junghoon Lee, Hanji Park, Myeonghyun Kim, Han-Jin Kim, Jin-yoo Suh, Namhyun Kang |
Role of Hydrogen and Temperature in Hydrogen Embrittlement of Equimolar CoCrFeMnNi High-entropy Alloy |
METALS AND MATERIALS INTERNATIONAL |
1598-9623 |
|
27 |
1 |
166-174 |
2021-01 |
15 |
Hyoungjin An, Junghoon Lee, Hanji Park, Jaeseok Yoo, Sungwook Chung, Jongmin Park, Namhyun Kang |
Cold Cracks in Fillet Weldments of 600 MPa Tensile Strength Low Carbon Steel and Microstructural Effects on Hydrogen Embrittlement Sensitivity and Hydrogen Diffusion |
KOREAN JOURNAL OF METALS AND MATERIALS |
1738-8228 |
|
59 |
1 |
21-32 |
2021-01 |
|
Hanji Park, Cheolho Park, Junghoon Lee, Namhyun Kang, Stephen Liu |
Influence of hydrogen on softened heat-affected zones during in-situ slow strain rate testing in advanced high-strength steel welds |
CORROSION SCIENCE |
0010-938X |
|
181 |
|
109229-109229 |
2021-04 |
8 |
Namkyu Kim, Youngjoon Kang, Jinhyeok Bang, Sangwoo Song, Seong-Moon Seo, Chung-Yun Kang, Namhyun Kang |
Effect of postweld heat treatments on type iv creep failure in the intercritical heat-affected zone of 10% cr martensitic steel welded with haynes 282 filler |
METALS |
2075-4701 |
|
11 |
5 |
726-726 |
2021-05 |
2 |
Chan Hyeok Lee, Seong-Woo Choi, P. L. Narayana, Thi Anh Nguyet Nguyen, Sung-Tae Hong, Jae H. Kim, Namhyun Kang, Jae-Keun Hong |
Effect of electric current heat treatment on commercially pure titanium sheets |
METALS |
2075-4701 |
|
11 |
5 |
783-783 |
2021-05 |
2 |
Namkyu Kim, Yongjoon Kang, Jinhyeok Bang, Sangwoo Song, Seong-Moon Seo, Chung-Yun Kang, Namhyun Kang |
Microstructural evolution and creep behavior of the weld interface between 10% cr steel and haynes 282 filler metal |
METALS |
2075-4701 |
|
11 |
5 |
764-764 |
2021-05 |
|
Chan Hyeok Lee, P.L. Narayana, Seong-Woo Choi, N. S. Reddy, Jae H. Kim, Namhyun Kang, Jae-keun Hong |
Influence of direct energy deposition parameters on ti–6al–4v component’s structure-property homogeneity |
METALS |
2075-4701 |
|
11 |
6 |
887-887 |
2021-05 |
|
Kwangsoo Kim, Namhyun Kang, Minjung Kang, Cheolhee Kim |
Assessment of heat-affected zone softening of hot-press-formed steel over 2.0 gpa tensile strength with bead-on-plate laser welding |
APPLIED SCIENCES-BASEL |
2076-3417 |
|
11 |
13 |
1-9 |
2021-07 |
4 |
Hanji Park, Byungrok Moon, Younghoon Moon, Namhyun Kang |
Hydrogen stress cracking behaviour in dissimilar welded joints of duplex stainless steel and carbon steel |
METALS |
2075-4701 |
|
11 |
7 |
1039-1039 |
2021-07 |
2 |
Hanji Park, Cheolho Park, Junghoon Lee, Hyunbin Nam, Byungrok Moon, Younghoon Moon, Namhyun Kang |
Microstructural aspects of hydrogen stress cracking in seawater for low carbon steel welds produced by flux-cored arc welding |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
0921-5093 |
|
820 |
|
141568-141568 |
2021-07 |
4 |
Daun Byeon, Heon-Young Ha, Sung-Dae Kim, Hyo-Haeng Jo, JinJong Lee, Jae Hoon Jang, Tae-Ho Lee, Jong-Ho Shin, Namhyun Kang |
Enhancement of corrosion properties of fe-18cr-9mn-5.5ni-0.3(c + n) austenitic stainless steels by carbon alloying |
METALS |
2075-4701 |
|
11 |
7 |
1124-1124 |
2021-07 |
1 |
Harish Kumar, Vikas Yadav, Anu, Sourav Kr. Saha, Namhyun Kang |
Adsorption and inhibition mechanism of efficient and environment friendly corrosion inhibitor for mild steel: Experimental and theoretical study |
JOURNAL OF MOLECULAR LIQUIDS |
0167-7322 |
|
338 |
|
116634-116634 |
2021-09 |
7 |
Hyunbin Nam, Jaeseok Yoo, Kwanghee Yun, Guo Xian, Hanji Park, Namkyu Kim, Sangwoo Song, Namhyun Kang |
Comprehensive analysis of cold-cracking ratio for flux-cored arc steel welds using y-and y-grooves |
MATERIALS |
1996-1944 |
|
14 |
18 |
5349-5349 |
2021-09 |
|
Woonam Choi, Sungwook Choi, Sehwook Bae, Namhyun Kang |
Computational Modelling and Experimental Analysis of Hardness and Microstructure of Reinforcing Bars Produced by Tempcore Process |
METALS AND MATERIALS INTERNATIONAL |
1598-9623 |
|
10 |
|
10-10 |
2021-10 |
2 |
Shveta Sharma, Richika Ganjoo, Sourav Kr. Saha, Namhyun Kang, Abhinay Thakur, Humira Assad, Vivek Sharma, Ashish Kumar |
Experimental and theoretical analysis of baclofen as a potential corrosion inhibitor for mild steel surface in HCl medium |
OURNAL OF ADHESION SCIENCE AND TECHNOLOGY |
0169-4243 |
|
|
|
20000230-20000230 |
2021-10 |
10 |
Hassane Lgaz, Sourav Kr. Saha, Han-seung Lee, Namhyun Kang, Fatima Zahra Thari, Khalid Karrouchi, Rachid Salghi, Khalid Bougrin, Ismat Hassan Ali |
Corrosion inhibition properties of thiazolidinedione derivatives for copper in 3.5 wt.% nacl medium |
METALS |
2075-4701 |
|
11 |
11 |
1861-1861 |
2021-11 |
1 |
Daniyal Abolhasani, Sang Wook Han, Chester J. Van Tyne, Namhyun Kang, Young Hoon Moon |
Enhancing the shape memory effect of Cu-Al-Ni alloys via partial reinforcement by alumina through selective laser melting |
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMRT |
2238-7854 |
|
15 |
|
4032-4047 |
2021-11 |
3 |
Jeong Mok Oh, P.L. Narayana, Jae-Keun Hong, Jong-Taek Yeom, N.S. Reddy, Namhyun Kang, Chan Hee Park |
Property optimization of TRIP Ti alloys based on artificial neural network |
JOURNAL OF ALLOYS AND COMPOUNDS |
0925-8388 |
|
884 |
|
161029-161029 |
2021-12 |
4 |
Jin-Young Choi, Joonoh Moon, Jae-Hoon Jang, Tae-Ho Lee, Hyun-Uk Hong, Hyoung Chan Kim, Nam Hyun Kang, Jong-Ho Shin, Chang-Hoon Lee |
Enhancement of mechanical properties by repeated heat treatment in reduced activation ferritic/martensitic steel with Ta and Ti |
JOURNAL OF NUCLEAR MATERIALS |
0022-3115 |
|
557 |
|
153321-153321 |
2021-12 |
|
Hyunbin Nam, Jeongwon Kim, Namkyu Kim, Sangwoo Song, Youngsang Na, Jun-Ho Kim, Namhyun Kang |
Effect of grain size on carburization characteristics of the high-entropy equiatomic CoCrFeMnNi alloy |
MATERIALS |
1996-1944 |
|
14 |
23 |
7199-7199 |
2021-12 |
|
Hyunbin Nam, Byungrok Moon, Sangwon Park, Namkyu Kim, Sangwoo Song, Nokeun Park, Youngsang Na, Namhyun Kang |
Gas tungsten arc weldability of stainless steel 304 using CoCrFeMnNi filler metals for cryogenic applications |
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING |
1362-1718 |
|
27 |
1 |
33-42 |
2022-01 |
2 |
Seonghoon Yoo, Byungrok Moon, Myeonghwan Choi, Xian Guo, Junghoon Lee, Namhyun Kang |
Effect of Ti/N Ratio on Grain Growth Inhibition in the Coarse-Grained Heat-Affected Zone of Low Carbon Steels Simulated for Ultra-High Heat Input and Tandem Electro-Gas Welding |
METALS AND MATERIALS INTERNATIONAL |
1598-9623 |
|
|
|
|
2022-01 |
|
Kwangsoo Kim, Namhyun Kang, Minjung Kang, Cheolhee Kim |
Effect of laser beam wobbling on the overlap joint strength of hot-press-forming steel over 2.0 GPa tensile strength |
JOURNAL OF LASER APPLICATIONS |
1042-364X |
|
34 |
1 |
012012-012012 |
2022-02 |
|
Shveta Sharma, Richika Ganjoo, Sourav Kr. Saha, Namhyun Kang, Abhinay Thakur, Humira Assad, Ashish Kumar |
Investigation of inhibitive performance of Betahistine dihydrochloride on mild steel in 1 M HCl solution |
JOURNAL OF MOLECULAR LIQUIDS |
0167-7322 |
|
347 |
|
118383-118383 |
2022-02 |
10 |
Guo Xian, Jieun Yu, Muralimohan Cheepu, Sang Myung Cho, Namhyun Kang |
Effect of Welding Speed on Microstructure and Anisotropic Properties of Wire-Arc Additive-Manufactured Ti-6Al-4V alloy |
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS |
0019-493X |
|
|
|
|
2022-03 |
|
Cuo Xian, Jeong mok Oh, Junghoon Lee, Sang Myung Cho, Jong-Tak Yeom, Yoonsuk Choi, Namhyun Kang |
Effect of heat input on microstructure and mechanical property of wire-arc additive manufactured Ti-6Al-4V alloy |
WELDING IN THE WORLD |
0043-2288 |
|
66 |
5 |
847-861 |
2022-05 |
1 |
Woonam Choi, Sungbin Won, Gil-Su Kim, Namhyun Kang |
Artificial Neural Network Modelling of the Effect of Vanadium Addition on the Tensile Properties and Microstructure of High-Strength Tempcore Rebars |
MATERIALS |
1996-1944 |
|
15 |
11 |
3781-3796 |
2022-06 |
|
Shveta Sharma, Sourav Kr. Saha, Namhyun Kang, Richika Ganjoo, Abhinay Thakur, Humira Assad, Ashish Kumar |
Multidimensional analysis for corrosion inhibition by Isoxsuprine on mild steel in acidic environment: Experimental and computational approach |
JOURNAL OF MOLECULAR LIQUIDS |
0167-7322 |
|
357 |
|
119129-119143 |
2022-07 |
1 |
Woonam Choi, Hyungsic Um, Hyangjun Yi, Namhyun Kang |
Mo addition of high-strength seismic rebars subjected to Tempcore processes for tensile strength enhancement |
MATERIALS & DESIGN |
0264-1274 |
|
219 |
|
110766-110766 |
2022-07 |
|
Daniyal Abolhasani, Sang Wook Han, Chester J. Van Tyne, Namhyun Kang, Young Hoon Moon |
Powder bed fusion of two-functional Cu-Al-Ni shape memory alloys utilized for 4D printing |
JOURNAL OF ALLOYS AND COMPOUNDS |
0925-8388 |
|
922 |
166228 |
1-17 |
2022-11 |
|
Guo Xian, Jeong mok Oh, Junghoon Lee, Sang Myung Cho, Jong‑Tak Yeom, Yoonsuk Choi, Namhyun Kang |
Efect of heat input on microstructure and mechanical property of wire‑arc additive manufactured Ti‑6Al‑4V alloy |
Welding in the World |
0043-2288 |
1.984 |
|
|
|
2022-02 |
1 |
Hyunbin Nam, Sanghyeon Park, Seong-Woong Kim, Sang Hun Shim, Youngsang Na, Namkyu Kim, Sangwoo Song, Sun Ig Hong, Namhyun Kang |
Enhancement of tensile properties applying phase separation with Cu addition in gas tungsten arc welds of CoCrFeMnNi high entropy alloys |
Scripta Materialia |
1359-6462 |
6.302 |
220 |
114897 |
1-6 |
2022-07 |
|
Seonghoon Yoo, Byungrok Moon, Myeonghwan Choi, Xian Guo, Junghoon Lee, Namhyun Kang |
Effect of Ti/N Ratio on Grain Growth Inhibition in the Coarse-Grained Heat-Affected Zone of Low Carbon Steels Simulated for Ultra-High Heat Input and Tandem Electro-Gas Welding |
Metals and Materials International |
1598-9623 |
3.451 |
28 |
11 |
2766-2777 |
2022-11 |
|
Jimin Nam, Junghoon Lee, Hanji Park, Cheolho Park, Changhoon Lee, Junho Chung, Seung-gun Lee, Namhyun Kang |
Alleviation of Hydrogen Embrittlement to Delay Effective Hydrogen Diffusion Against MA Constituent Formation Due to Mo Solutes for 420 MPa Grade Offshore Steels |
Metals and Materials International |
1598-9623 |
3.451 |
|
|
1-12 |
2022-11 |
|
Daniyal Abolhasani, Sang Wook Han, Chester J VanTyne, Namhyun Kang, Young Hoon Moon |
Alleviation of Hydrogen Embrittlement to Delay Effective Hydrogen Diffusion Against MA Constituent Formation Due to Mo Solutes for 420 MPa Grade Offshore Steels |
Journal of Alloys and Compounds |
0925-8388 |
6.371 |
922 |
|
166228 |
2022-11 |
|
Cheolho Park, Taewoo Hwang, Gi-Dong Kim, Hyunbin Nam, Namhyun Kang |
Effect of the Initial Grain Size on Laser Beam Weldability for High-Entropy Alloys |
Crystals |
2073-4352 |
2.670 |
13 |
1 |
65 |
2023-01 |
|
Jaeseok Yoo, Hyoungjin An, Junghoon Lee, Kwang Hee Yun, Sourav Kr Saha, Namhyun Kang |
Prediction on cold crack sensitivity using hydrogen embrittlement index measured from in situ slow-strain-rate testing for multipass flux-cored arc weld metals of shipbuilding and offshore steels |
Materials Characterization |
1044-5803 |
4.537 |
|
|
112637 |
2023-01 |
|
Sanghyeon Park, Hyunbin Nam, Yoona Lee, Nokeun Park, Sunig Hong, Youngsang Na, Cheolho Park, Namhyun Kang |
Enhancement of Hardness and Yield Strength Induced by Cu-Rich Phase and Its Effect at Cryogenic Temperature on Gas Tungsten Arc Welds of Ferrous Medium-Entropy Alloy |
Metals and Materials International |
1598-9623 |
3.451 |
|
|
1-15 |
2023-01 |
|
Guo Xian, Muralimohan Cheepu, Jieun Yu, Sang Myung Cho, Jong-Taek Yeom, Yoon Suk Choi, Namhyun Kang |
Enhancing Tensile Properties of Wire-Arc Additively Manufactured Ti-6Al-4 V Deposits Via Cryogenic Vaporised Ar Shielding/Cooling |
Metals and Materials International |
1598-9623 |
3.451 |
29 |
2 |
501-514 |
2023-02 |
|
Yoona Lee, Sanghyeon Park, Myeonghwan Choi, Jooil Park, Haksoo Han, Kwanghyeon Lee, Namhyun Kang |
Effectiveness of Using Low‐Strength‐Grade Filler Wires for 800 MPa Grade Ultra‐High‐Strength Steels Laser Beam Welds |
steel research international |
1611-3683 |
2.126 |
94 |
2 |
2200248 |
2023-02 |
|
Daniyal Abolhasani, Byungrok Moon, Namhyun Kang, Chester J VanTyne, Young Hoon Moon |
Feasibility of using graphene as a substitute to graphite in the laser surface hardening of ferritic stainless steel |
Journal of Materials Research and Technology |
2238-7854 |
6.267 |
|
|
|
2023-02 |
|
Books & Chapters
구분 (저서/역서/보고서) |
출판일자 | 제목 | 저자 | 발행처 |
---|---|---|---|---|
역서 | 2013.02.06 | 금속물리야금학 | 강정윤, 강남현, 남원종, 안용식 | 센게이지러닝코리아 |